Update to 1.21.11

bluemap/config/core.conf

@@ -46,3 +46,9 @@ log: {
   # Default is false
   append: false
 }
+
+# The interval in minutes in which a full map-update will be triggered.
+# This is ADDITIONALLY to the normal map-update process (in case that fails to detect any file-changes).
+# ! This DOESN'T re-render the entire map each time, it only checks if there are some changes that have not been rendered yet!
+# Default is 1440 (24 hours)
+full-update-interval: 1440

bluemap/config/maps/creative.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/redstoner_bigplots.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/redstoner_creative.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/redstoner_trusted.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/survival_1.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/survival_1_nether.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/survival_1_the_end.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true

bluemap/config/maps/synergy_plots_1.conf

@@ -100,7 +100,7 @@ render-edges: true
 # Changing this to false will not remove any existing tiles, existing tiles just won't get updated anymore.
 # Changing this to true will require a re-render of the map.
 # Default is true
-save-hires-layer: true
+enable-hires: true
 
 # This defines the storage-config that will be used to save this map.
 # You can find your storage configs next to this config file in the 'storages'-folder.
@@ -128,3 +128,24 @@ marker-sets: {
   # https://bluemap.bluecolored.de/wiki/customization/Markers.html
 
 }
+
+# Defines the initial sky-light-strength the map will be set to when it is opened.
+# 0 is no sky-light, 1 is fully lighted.
+# You can change this at any time.
+# Default is 1
+sky-light: 1
+
+# Whether the perspective view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and free-flight view is disabled.
+# Default is true
+enable-perspective-view: true
+
+# Whether the flat (isometric, top-down) view will be enabled for this map.
+# Having only flat-view enabled while disabling free-flight and perspective will speed up the render and reduce the maps storage-size.
+# Default is true
+enable-flat-view: true
+
+# Whether the free-flight view will be enabled for this map.
+# Changing this to true requires a re-render of the map, only if the hires-layer is enabled and perspective view is disabled.
+# Default is true
+enable-free-flight-view: true